Power Outage causes DSSRV to power off and does not restart until end-user intervention
Pelco Video Management
Power failure causes DSSRV to shut off
- Enter the BIOS after restarting by pressing the DEL key.
- Navigate to Chipset tab > PCH-IO Configuration > Restore AC Power Loss > select Power On.
- Press F4 to save and exit.
Enter the BIOS after restarting by pressing the DEL key
Navigate to the Chipset menu and select South Bridge
Navigate to Restore AC Power Loss
Press the Enter key for selection and choose Power On
Hit the ESC key to exit the menu and navigate to Save & Exit - Press Enter twice to Save and Exit