Wire location on a ERD97P21-U
Pelco Cameras, Pelco Transmission & Power
Installation pinouts information on a ERD97P21-U.
Refer to ERD97P21-U installation manual for power requirement.
Note: WIRING TIPS
Pan/Tilt –The ERD9721-U has two connections for wiring pan/tilt preset operation.
- SL/PP Models – Wire Pan A to the pan/tilt connection that is labeled “SL (360°) Preset.” Wire Pan B to the pan/tilt connection that is labeled “Pan Preset.”
- PP Models – Pan A is not used. Wire Pan B to the pan/tilt connection that is labeled “Pan Preset.”